top of page

CLEARS:

GLAMOUR CLEAR #9461

Signature Series Glamour Clearcoat is a premium high solids clearcoat that delivers an unsurpassed appearance for multi-panel and overall repairs. It features optimum flow and leveling, excellent flexibility, UV protection and is highly resistant to stone chips and abrasions. This product is ideal for use over single stage or base/clearcoat applications. 9461 may be used in air dry, downdraft or force dry applications.

SIGNATURE SERIES EURO CLEAR #7311

2.1 Low V.O.C. Euro Classic Clearcoat is designed for applications requiring the ultimate finish appearance. This high solids clearcoat provides optimum flow and leveling and imparts a glass-like finish. 2.1 Low V.O.C. Euro Classic Clearcoat is an acrylic urethane clearcoat with a sprayable V.O.C. of 2.1#/gal (using EPA Test Method 24) for spot, panel and overall refinishing. This product can be used with all solvent based and water based basecoats.

SPEED CLEAR #9451/9454

Signature Series Speed Clearcoat is a medium solids, ultra fast cure clearcoat for spot and panel topcoating. Productivity is increased with 10 minute dust, 20 minute touch and 30 minute polish times.

MOTOR CITY CLEAR #8031

Motor City Clearcoat 8031 is an acrylic urethane clearcoat with a sprayable V.O.C. of 2.1 #/gal. This product can be used with all solvent and water based basecoats. It is suitable for all automotive refinishing as well as trucks and equipment (4:1).

MOTOR CITY CLEAR #8051

Motor City Clearcoat 8031 is an acrylic urethane clearcoat with a sprayable V.O.C. of 2.1 #/gal. This product can be used with all solvent and water based basecoats. It is suitable for all automotive refinishing as well as trucks and equipment (2:1).

JAMMIN’ CLEAR #6213

Transtar’s Jammin’ Clear is an excellent acrylic clear designed for use when performing small spot and panel repairs. This readyto-use product is exceptional for use on replacement parts, door jambs, hood and trunk jambs and cut-ins. The convenient aerosol can provides speed and efficiency. Jammin’ Clear is fast drying, exhibits good clarity and provides excellent gloss.

KICKER #6417

Transtar Kicker Urethane Accelerator is designed to accelerate the curing, dust, tack and tape times of Transtar Acrylic Urethane Primers and Clear Coats with no sacrifice of pot life. When Kicker is used according to the directions, it can save time and cost, by improving shop productivity.

REDUCER #6701-F, 6711-F, 6721-F

Transtar’s® Zero VOC Urethane Grade Reducers are designed for use in Transtar’s urethane primers, sealers, topcoats and clearcoats. Additionally, they can be used in virtually all brands of urethane primers, sealers, topcoats and clearcoats. These reducers must be used in the No Mix Low VOC Basecoat System in order for the basecoat to be 50 state compliant. They are suitable for overall and spot/panel refinishing and assist in producing brilliant gloss and superior leveling (Fast, Medium, Slow).

FLATTENING AGENT #6494

Urethane Flattening Agent is a universal flexible flattening (matting) additive for use in all Transtar urethane clearcoats and most competitive urethane clearcoat systems. It provides three different gloss levels with easy addition. Urethane Flattening Agent is easy to incorporate in the clearcoat, the activator or the activated clearcoat.

PRIMERS:

DTM PRIMER #7341, 7361, 7371

2.1 Low VOC Euro Classic DTM Primer is a 2K primer surfacer that can be applied directly to metal surfaces. It is quick drying and easy to sand wet or dry. It provides corrosion protection along with excellent fill and build properties. This unique primer provides improvements in productivity and reduces cycle times while providing significant labor and material savings. This primer can also be tinted using Transtar’s “Star Shade” system for a better match (Grey, White, Black).

SPEED PRIMER #9471, 9474

Signature Series Speed Primer is a premium, 2K urethane primer surfacer that covers in as little as two coats and air dries in 30 minutes under ideal conditions! This easy-to-sand primer surfacer can be applied directly to metal, provides excellent gloss holdout and is highly resistant to film shrinkage. Save 30-40% on your entire labor process time when used in conjunction with Transtar’s No Mix® Low VOC Basecoat and Signature Series Speed Clearcoat.

AEROSOL PRIMER #4603, 4613, 4623, 4633, 4673

2 in 1 Primers are a specialty coating designed for easy and convenient priming of metal and plastic parts. These primers help prevent rust and seal out moisture, while providing a smooth base for topcoat application on metal substrates. 2 in 1 Primers also have excellent flexibility and adhesion properties that enable them to be applied to flexible and rigid parts. 2 in 1 Primers are fast drying, provide superior fill and build, and are easy to sand. They are compatible with virtually all automotive paints (Grey, Black, Red, White, Rose)

ADHESION PRIMER #1074, 1084, 1094

This unique combination of adhesion promoter and primer provides significant labor and cost savings. It can save up to 2 hours of labor when prepping a raw or previously primed bumper or plastic part. Adhesion Primer is a single component non-sanding primer suitable for TPO & RIM substrates. It is fast drying and offers excellent adhesion. It is available in 3 colors to best suit your needs. No need for two steps, adhesion promoter and primer all in the same step (Grey, White, Black)

SEALER #9521, 9531, 9541

Signature Series Low VOC Sealer has been specifically formulated as a premium quality sealer to be used over a variety of substrates. This sealer offers excellent adhesion to bare metal, aluminum, SMC, fiberglass, old paint finishes and all Transtar primers. It has excellent leveling and gloss hold out properties and is compatible with most basecoat/clearcoat and single stage systems. It is available in 3 colors to suit all your color match needs.

PAINT:

SEALER #9521, 9531, 9541

Signature Series Low VOC Sealer has been specifically formulated as a premium quality sealer to be used over a variety of substrates. This sealer offers excellent adhesion to bare metal, aluminum, SMC, fiberglass, old paint finishes and all Transtar primers. It has excellent leveling and gloss hold out properties and is compatible with most basecoat/clearcoat and single stage systems. It is available in 3 colors to suit all your color match needs.

AEROSOLS:

CHIPGUARD #4313

Tex Coat is a rapid drying, flexible protective coating. Texture can be varied to match OEM textures as found on rocker panels, valances, etc.

AMBER RUSTPROOFING #4423

Amber Rustproofing matches OEM appearance while providing superior rust protection. Abrasion resistant coating will flow into hard to reach seams. Designed for replacement panels or new car rustproofing and restores the repair of existing corrosion protection to original specifications found on the interior of fender and panel replacements. Note: Amber Rustproofing is not recommended for use on exposed areas such as luggage compartments or engine bays, as the material remains tacky after application.

TRIM BLACK #4643, 4653, 4663

2 in 1 Trim Black is a tough, flexible polymer coating designed to restore bumpers and flexible or rigid trim to their OEM condition. Transtar offers 3 gloss levels, matte, satin and gloss, to match the appearance on most vehicles. It has excellent adhesion to urethane, rubber, metal and treated olefin plastics. It is fast drying, provides excellent adhesion and requires no priming.

GUIDE COAT #9183

Low Spot Finder Guide Coat is a specialty coating that will provide the technician with a visual aid to ensure primed surfaces are totally smooth. This product sands easily and will not clog sandpaper. Low Spot Finder Guide Coat is fast drying and ready to sand in minutes. It provides the quick and efficient method to find low spots on body filler, primer, glazing putties and other repair components.

SELF ETCHING PRIMER #6183, 6193, 6194

Self Etching 1K Primer is a ready to use one component metal etching primer. It provides excellent adhesion and protection against corrosion to bare metal, thereby eliminating the need for metal conditioning. It is recommended for use to treat bare metal or for application under primer surfaces.

WELD THRU PRIMER #4353

Transtar’s Weld Through Primer is a ready-to-use primer to aid in MIG/TIG welding. Weld Through Primer offers high resistance to salt and water, providing excellent corrosion protection to the weld area. It is quick drying and water-resistant after 15 minutes. It is formulated to be V.O.C. compliant in California. It provides superior conductivity for welding applications and has minimal spatter during welding.

ACRY SOLVE #9783

Acry Solvent adhesive cleaner quickly softens and removes adhesives, tar, grease, oil, body sealers, wax, undercoating overspray and silicones. Acry Solvent can also be used as a pre-paint cleaner and conditioner, it leaves no residue on the surface and is safe for use on automotive finishes when used as directed.

PLASTIC REPAIR & OTHER:

SPOT PUTTY #4236

To ensure an ultra smooth surface, use Transtar’s Pit-Fill Spot Putty. It is a single component polymer based system that air dries to a sandable, durable finish in minutes! Designed for use in filling scratches, pinholes, low spots, blemishes, sanding marks and other surface imperfections. Pit-Fill Spot Putty has excellent adhesion to bare metal, galvanized, aluminum and over other properly prepared existing finishes. Once cured, it can be sanded to a featheredge and accepts virtually all paint finishes. It features minimal shrinkage and an ultra-smooth consistency.

UNIVERSAL QUICK ADHESIVE #1458

Universal Quick Adhesive is a fast-curing, urethane adhesive designed for plastic repairs. It is ideal for quickly repairing bumper tabs, brackets, headlight buckets and grills. It is an excellent choice for bonding backer panels, moldings, emblems and most small plastic, metal and aluminum parts. Universal Quick Adhesive is specially formulated for most automotive plastics, (including TPO, PP, PE) as well as metal, SMC, and fiberglass. This high strength adhesive is sandable and offers great feather edging characteristics with no pinholing.

UNIVERSAL PLASTIC REPAIR #1468

Plasto-Mend Universal Plastic Repair, 1468-G, is an epoxy-based, easy-to-sand adhesive with superior feather edging qualities. 1468-G was specially designed for basic cosmetic repairs of all types of plastics including: ABS, TPO, PP, PU, and others. 1468-G is also excellent for repairs to body panels, grills, composite bumpers, headlamp housings, interior plastics and more.

RIGID REPAIR #1478

Plasto-Mend Rigid Plastic Repair, #1478, is a high strength, epoxy-based, adhesive designed to work on all rigid substrates such as PC, SMC, BMC, and fiberglass. Most common repairs include: rejoining cracked or broken panels, sectioning rigid parts, or as a filler material for repairing cracks, holes and gouges.

WINDSHIELD ADHESIVE #4502

Urethane Windshield Adhesive is a one part moisture curing urethane adhesive designed to provide a strong bond to all windshield and backlight replacements. This product exhibits excellent adhesion to glass and pinch weld surfaces designed for use in a close cut-out method or tape installation. Urethane Windshield Adhesive passes FMVSS 208, 212, and 216 strength requirements.

SEAM SEALER #4157, 4167

Ultra Flex® Seam Sealer is a rapid curing, flexible seam sealer designed for all types of painted surfaces, bare metal and primed surfaces.

SEAM SEAL GUN #4435

AUTOMOTIVE ATTACHMENT TAPE #4580, 4585, 4588

Transtar Automotive Attachment Tapes are .030” thick double-sided, black polyethylene foam tapes. Typical applications include side moldings, trim emblems and other exterior parts.

ATTACHMENT TAPE ADHESION PROMOTOR #4516

Body-Tec® Attachment Tape Adhesion Promoter is specifically formulated for use with Transtar Attachment Tape. It is a liquid primer used for enhancing adhesion of most low surface energy plastics (TPO, PPO, PP, PC, etc.) as well as injection molded body side moldings and claddings used for automotive exterior trims.

AQUA SCAT II #1391, 1394

Transtar’s Aqua SCAT 2 Waterborne Degreaser is a specially formulated, water-based degreaser that can be used on all plastics, metal and pre-painted parts. Its unique mix of alcohol, surfactants and water make it ideal for cleaning and degreasing plastics prior to painting or priming. Aqua SCAT 2 also reduces the amount of dust contact by neutralizing static charge. Compliant across North America.

CORROSION KIT #4471

Application kit includes: 2 each 36" tubing with 360° tip, 1 each 36" tubing, 2 each short tubes and 6 extra aerosol buttons.

CORROSION STRIPPING KIT #6673, 6674, 6675

Description: #6673: Transtar Stripe Removal Tractor Wheel is a durable, nonabrasive rubber wheel designed for the removal of detail appliqués (such as pinstripes, decals, etc.), adhesive tapes and double faced tapes. Tractor style aggressively removes decals & adhesives without damaging vehicle finish. #6674: Transtar Stripe Removal/GP Abrasive Disc Tool Kit is an eraser tool kit which includes (1) Stripe Removal Tool, (1) 6673, Stripe Removal Tractor Wheel, (1) 6675 GP Abrasive Disc (purple 2 pack), and (1) 6676 GP Disc Arbor. #6675: GP Abrasive Disc is designed to aggressively remove rust, clean welds and remove paint. Note: 6673 and 6675 are compatible with 6671 Transtar Stripe Removal Tool.

bottom of page